The laminate is coated in order to prevent itself from sticking to the roll when being used. Simply use a wet rag with dish soap and wipe down the poster. This will remove the coating and will allow for better adhesion.

With the turn of the crank handle the Cold Laminator laminates the document at the same speed as the handle turning. Unlike traditional school laminators, there is no need to warm up or cool down the laminator, as it requires no heat or electricity.

The VariQuest Cold Laminator 2510 laminate is 25” x 300’.

Please see the VariQuest Cold Laminator User’s Guide.

Please see the VariQuest Cold Laminator User’s Guide for instructions on loading and aligning documents using the input guides and hooks.

Please see the VariQuest Cold Laminator User’s Guide for instructions on attaching and removing output hooks.

With the Cold Laminator you can laminate about 110 to 115 standard (24” x 31”) posters using one roll of laminate. 

No, only laminate sold through your authorized VariQuest dealer is matched with the laminator to assure the high-quality output from the Cold Laminator. Laminate for other cold roll laminators is not compatible.

Yes, there is no need to leave a margin of laminate as the dual-sided laminate will keep the edges from separating.